To take your Xbox 360 hard drive to another, you must first know how.
I am going to show you how to take the guesswork out of that for you.
Disassemble the Xbox 360
The items you need:
Screwdriver T10 (Allen)
T6 screwdriver (hex)
Patience and determination
The hard drive is very small, and the screws are slightly smaller and the parts are all and everything just makes things a little 'difficult to work with.
You should know that if you take your xbox360 apart will invalidate the warranty on the hard disk.
First, remove the adhesive warranty, take out your T6 Allen wrench and screw all 4 screws on each side of the disc.
After taking the screws out, gently, very gently open with the flat side down, you do not want the locking mechanism from falling apart while he is engaged. (See this video to see)
Now pull your key and remove the 4 T10 screws next pressing the edge of the heat when you get the heat removed from the guard to stop serial adapter
Take care, you do not want all parts of the spring and small pieces of plastic falling everywhere.
Next simply slide the drive out of his house and your done!
It's an easy job to remove the hard drive from its case!
